Del ozone Spa-Eclipse Especificaciones Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
www.delozone.com 1-800-676-1335
ECLIPSE Ozone Generator
Installation & Maintenance
16
The most common installation method allows ozone to be dissolved into pool
water through an adjustable injector manifold assembly that is installed into
the plumbing system following all other equipment.
DEL injector manifolds contain a Mazzei injector and a ball valve. The
injector manifold is installed as the last piece of equipment before the return
to the pool/spa (shown below). The ball valve is used to redirect the water
ow through the injector. The injector is tapered to constrict the water
ow, thus creating a vacuum that pulls ozone gas from the ozonator into
the injector via ozone supply tubing. The vigorous interaction between the
incoming water and ozone gas creates very ne ozone bubbles which dissolve
into the water. DEL has a variety of injector assemblies available. The
IU-216 is for use with in-oor cleaning systems - this injector is not standard
and, therefore, must be specied when ordering. A check valve should be
installed in the ozone supply tubing between the ozone generator and injec-
tor manifold to prevent water backup into the generator.
If the system is professionally hard-wired into the time clock (this is the
most common method), the ozone generator will only operate during this
time. If the system is simply plugged in with the 3-prong plug supplied
with most Eclipse models, the generator will constantly produce ozone, but
it will not be introduced into the water until the other equipment runs, thus
creating a vacuum to pull the ozone out of the generator (not recommended).
The ozone, in most applications, will only run during normal operation of the
ltration equipment. The longer your ltration equipment runs, the cleaner
the pool will be. We do not recommend running the equipment less than 8
hours. Again, the longer the better. If possible, install an injector-driven
pool system with an independent small pump.
spaparts.com.au - Australian Spa
Parts
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Comentarios a estos manuales

Sin comentarios